Check Engine Light Flashing? What It Means

Car gauge cluster with an amber check engine light lit next to the tachometer
By Team Automotive & Parts · Auto repair in Goshen, Indiana
The short version
  • A check engine light flashing means something is wrong right now, most often a bad misfire.
  • A steady light is a "get it looked at soon." A flashing light is a "slow down and get off the road."
  • Driving on a flashing light can ruin the catalytic converter, which is one of the priciest parts on the car.
  • Common causes: spark plugs, ignition coils, fuel injectors, or a vacuum leak.
  • If it keeps flashing, park it. A short tow beats a much bigger repair.

The check engine light has been on for weeks, and you got used to it. Then one day it starts blinking. The car shakes a little at a stoplight. Now what?

A check engine light flashing is not the same warning as one that just stays on. It is your car's way of saying "this is happening now."

We are a repair shop in Goshen, Indiana, and we read these codes every day. Here is what the flashing means, why it matters, and what to do in the next five minutes.

Flashing vs. solid: what is the difference?

Your car only has one check engine light, but it talks two ways.

01
Solid light

The computer found a problem and saved a code. It is not an emergency, but do not wait months. Sometimes it is as simple as a loose gas cap.

02
Flashing light

The problem is active and could cause damage right now. Usually the engine is misfiring badly. Ease off the gas and plan to stop.

The Car Care Council says it plainly. A flashing check engine light means a problem that is happening now and needs attention right away. The same group notes a loose gas cap can turn on a steady light. Check that first when the light is solid.

Why the check engine light is flashing

Nine times out of ten, a check engine light flashing points to a misfire. That means one or more cylinders are not firing the way they should. The engine feels rough, shaky, or weak.

Here is what usually causes it:

  • Worn spark plugs. Old plugs cannot make a strong spark, especially on a cold start.
  • A bad ignition coil. Many engines have one coil per cylinder. When one dies, that cylinder goes dead.
  • A clogged or leaking fuel injector. Too little or too much fuel in one cylinder.
  • A vacuum leak. A cracked hose lets in extra air and throws off the mix.
  • Low compression. The serious one. A worn engine part means a cylinder cannot build pressure.

Wet weather can make a weak coil or plug wire act up more. So can the first cold mornings of the year in Northern Indiana.

Why you should not keep driving

When a cylinder misfires, raw fuel goes out into the exhaust. It ends up in the catalytic converter, which gets very hot. That extra fuel burns inside it, and the heat can melt it from the inside.

That is why a check engine light flashing is worth taking seriously. A misfire that might be fixed with a spark plug or coil today can turn into a new catalytic converter too, if you keep driving. That is a much bigger bill for the same problem.

Smell gas or rotten eggs? Both can show up with a flashing light. A sulfur smell can mean the converter is already running too hot. If you smell raw fuel, read our guide on why your car smells like gas.

What to do right now

If your check engine light is flashing while you drive:

  • Ease off the gas. Hard driving makes the misfire worse.
  • Skip the highway if you can. Stay off heavy loads, hills, and towing.
  • Pull over when it is safe. Turn the car off for a few minutes.
  • Restart and watch. If it still flashes, do not keep driving. Call a tow.
  • If it goes back to solid, drive gently and straight to a shop.

Not sure if it is safe to drive at all? Our post on whether to drive it or tow it lays out the call.

Common combos and what they mean

People often search for a check engine light flashing along with something else. Here is what those pairs usually point to.

  • Flashing and the car shaking. Almost always a misfire. The shake is the dead cylinder.
  • Flashing when you speed up, then it stops. The misfire shows up under load. Often a weak coil or plug.
  • Flashing, then it turns off. The problem came and went. The code is still saved, so get it read.
  • Flashing with the traction control light on. Many cars shut off traction control when they see an engine fault. Fix the engine problem and the second light usually goes out.

If you also notice slipping or hard shifts, the trouble might be the transmission instead. Our post on signs your transmission is going out can help you tell them apart.

How a shop finds the cause

A code reader tells us which cylinder is misfiring, but not always why. So we test from there. We swap a coil to see if the misfire follows it. We check the plugs, the injector, and look for vacuum leaks. If those are fine, we test the engine's compression.

Most of the time, a check engine light flashing comes down to one bad part. That way you pay to fix the actual problem, not to guess at parts. Check engine light diagnosis is on our list of auto repair services. For general tips on picking a shop you can trust, see AAA's auto repair resources.

What does it cost to fix? Costs vary by make and model and by what we find. Call us and we can check it out at no cost. For a refresher on all the other lights on your dash, see our post on what your dashboard warning lights mean.

In This Article ▲

Quick answers

What does a flashing check engine light mean?

It means a problem is happening right now, most often a serious engine misfire. Slow down, avoid hard driving, and get the car to a shop or call a tow.

Can I drive with my check engine light flashing?

Only as far as it takes to get off the road safely. Driving on a misfire can overheat and ruin the catalytic converter.

Why is my check engine light flashing and the car shaking?

That combo almost always means a misfire. Spark plugs, ignition coils, and fuel injectors are the usual causes.

Why did my check engine light flash and then stop?

The misfire came and went. The code is usually still saved in the computer, so have it read before it comes back worse.

How much does it cost to fix a flashing check engine light?

Costs vary by make and model and by the cause. Call us and we can check it out at no cost.

Blinking light? Let us read it.

Check engine light diagnosis and misfire repair at our shop in Goshen, Indiana.

Call (574) 533-9081

Team Automotive & Parts · 16145 Co Rd 138, Goshen, IN · Mon–Fri 8–5

Siguiente
Siguiente

Slid Into a Ditch? What to Do Next